Yamaha L2 - Show Supplicant Information

802.1X Port-Based Authentication : Enabled
MAC-Based Authentication : Disabled
WEB-Based Authentication : Enabled
Clear-state time : Not configured
Redirect URL :
Not configured
RADIUS server address :
192.168.100.101 (port:1812)
[Interface information]
Interface port1.1 (up)
802.1X Authentication : Auto (configured:auto)
MAC Authentication : Disabled (configured:disable)
WEB Authentication : Disabled (configured:disable)
Host mode : Single-host
Dynamic VLAN creation : Disabled
Guest VLAN : Disabled
Reauthentication : Disabled
Reauthentication period : 60 sec
MAX request : 2 times
Supplicant timeout : 30 sec
Quiet period : 60 sec
Controlled directions : Both (configured:both)
Protocol version : 2
Authentication status : Authorized
Clear-state time : Not configured
Interface port1.4 (down)
802.1X Authentication : Force Authorized (configured:-)
MAC Authentication : Disabled (configured:disable)
WEB Authentication : Enabled (configured:enable)
Host mode : Multi-supplicant
Dynamic VLAN creation : Disabled
Guest VLAN : Disabled
Reauthentication : Disabled
Reauthentication period : 3600 sec
MAX request : 2 times
Supplicant timeout : 30 sec
Server timeout : 30 sec
Quiet period : 60 sec
Controlled directions : In (configured:both)
Protocol version : 2
Clear-state time : Not configured
5.3.24 Show supplicant information
[Syntax]
show auth supplicant [interface ifname]
[Keyword]
interface : Show information for only a specified interface
[Parameter]
ifname : Interface name
Interface to show
[Input mode]
priviledged EXEC mode
[Description]
Shows the supplicant information for port authentication.
[Example]
Show supplicant information for LAN port #1.
SWR2311P#show auth supplicant interface port1.1
Port MAC address User name Status VLAN Method
Command Reference | Interface control | 145