Yamaha L2 - HTTP Proxy; Enable HTTP Proxy Function; Set HTTP Proxy Function Timeout; Show HTTP Proxy Function Settings

4.16 HTTP Proxy
4.16.1 Enable HTTP Proxy function
[Syntax]
http-proxy switch
no http-proxy
[Parameter]
switch : Whether to enable HTTP Proxy function
Setting value Description
enable Enable
disable Disable
[Initial value]
http-proxy disable
[Input mode]
global configuration mode
[Description]
Enables the HTTP Proxy function of the HTTP server.
If this command is executed with the "no" syntax, the function is disabled.
[Example]
Enable the HTTP Proxy function of the HTTP server.
SWR2311P(config)#http-proxy enable
4.16.2 Set HTTP Proxy function timeout
[Syntax]
http-proxy timeout time
no http-proxy timeout [time]
[Parameter]
time : <1-180>
Time (seconds) until timeout occurs
[Initial value]
http-proxy timeout 60
[Input mode]
global configuration mode
[Description]
Specifies the timeout time when acquiring the web GUI of an L2MS slave.
If this command is executed with the "no" syntax, the setting will be 60 seconds.
[Example]
Set HTTP Proxy function's timeout duration to two minutes.
SWR2311P(config)#http-proxy timeout 120
4.16.3 Show HTTP Proxy function settings
[Syntax]
show http-proxy
[Input mode]
priviledged EXEC mode
74 | Command Reference |
Maintenance and operation functions