Yamaha L2 - Set SNMP Community; Set SNMP View

[Input mode]
global configuration mode
[Description]
Sets the MIB variable sysLocation.
sysLocation is a variable that is generally used to enter the installed location of the unit.
If this command is executed with the "no" syntax, the setting is deleted.
[Example]
Set the system location as "MainOffice-1F".
SWR2311P(config)#snmp-server location MainOffice-1F
4.10.5 Set SNMP community
[Syntax]
snmp-server community community ro_rw
no snmp-server community community
[Parameter]
community : Community name (maximum 32 characters)
ro_rw : Access restriction
Setting value Description
ro Read only
rw Write allowed
[Initial value]
none
[Input mode]
global configuration mode
[Description]
Sets the SNMP community.
Up to 16 communities can be registered.
If this is executed with the "no" syntax, the specified community is deleted.
[Example]
Set the read-only community name to "public".
SWR2311P(config)#snmp-server community public ro
Delete the "public" community.
SWR2311P(config)#no snmp-server community public
4.10.6 Set SNMP view
[Syntax]
snmp-server view view oid type
no snmp-server view view
[Parameter]
view : View name (maximum 32 characters)
oid : MIB object ID
type : Type
Command Reference | Maintenance and operation functions | 53