SWR2311P>
4.3 Configuration management
4.3.1 Save running configuration
[Syntax]
copy running-config startup-config
[config_num]
[Parameter]
config_num : Configuration number
Setting value Description
<0-4> Startup configuration #0-#4
sd Startup config in SD card
[Input mode]
priviledged EXEC mode
[Description]
Saves the current operating settings (running configuration) as the settings for startup (startup configuration).
If config_num is omitted, it is saved in the startup config that was used for the current startup.
[Note]
The running configuration can also be saved by executing the write command.
[Example]
Save the running configuration.
SWR2311P#copy running-config startup-config
Succeeded to write configuration
SWR2311P#
4.3.2 Save running configuration
[Syntax]
write [config_num]
[Parameter]
config_num : Configuration number
Setting value Description
<0-4> Startup configuration #0-#4
sd Startup config in SD card
[Input mode]
priviledged EXEC mode, individual configuration mode
[Description]
Saves the current operating settings (running configuration) as the settings for startup (startup configuration).
If config_num is omitted, it is saved in the startup config that was used for the current startup.
[Note]
The running configuration can also be saved by executing the copy running-config startup-config command.
[Example]
Save the running configuration.
SWR2311P#write
Command Reference | Maintenance and operation functions | 31
To Next Page
Loading...
