Yamaha L2 - 5.6 PoE

5.5.2 Show error detection function information
[Syntax]
show errdisable
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows information for the error detection function.
The following items are shown.
•
Whether automatic recovery from the errdisable state is enabled or disabled
• The interface that is in the errdisable state, and the function that detected the error
[Example]
Show information for the error detection function.
SWR2311P>show errdisable
function auto recovery interval
-----------------------------------------------
BPDU guard disable
Loop detect enable 300
Port-security disable
port reason
----------------------------
port1.1 BPDU guard
port1.7 Loop detect
5.6 PoE
5.6.1 Set PoE power supply function (system)
[Syntax]
power-inline switch
no power-inline
[Parameter]
switch : System-wide PoE power supply function settings
Setting value Description
enable
Enables the system-wide PoE power supply
function
disable
Disables the system-wide PoE power supply
function
[Initial value]
power-inline enable
[Input mode]
global configuration mode
[Description]
Set the system-wide PoE power supply function as enabled or disabled.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
Even if the system-wide PoE power supply function is enabled, power supply will be disabled for each port if the power supply
function is disabled for individual ports.
[Example]
Enable the system-wide PoE power supply function.
Command Reference | Interface control | 153