Yamaha L2 - Show Unit Information; Show Inventory Information; Show Operating Information

[Description]
Shows the setting of the SD card boot function.
[Example]
Show the setting of the SD card boot function.
SWR2311P#show boot prioritize sd
SD boot configuration:
firmware : enable
4.5 Show unit information
4.5.1 Show inventory information
[Syntax]
show inventory
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows inventory information for this unit and the SFP modules.
The following items are shown.
Item Description
NAME Name
DESCR Description
Vendor Vendor name
PID Product ID
VID Version ID, 0 if invalid
SN Serial number
[Example]
Show inventory information.
SWR2311P>show inventory
NAME: L2 PoE switch
DESCR: SWR2311P-10G
Vendor: Yamaha
PID: SWR2311P-10G
VID: 0000
SN: S00000000
SWR2311P>
4.5.2 Show operating information
[Syntax]
show environment
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows information about the system's operating environment.
The following items are shown.
•
Boot version
• Firmware revision
• Serial number
• MAC address
• CPU usage ratio
• Memory usage ratio
Command Reference | Maintenance and operation functions | 37