Yamaha L2 - Show the Running Configuration; Show Startup Configuration

Succeeded to write configuration.
SWR2311P#
4.3.3 Show the running configuration
[Syntax]
show running-config [section]
[Parameter]
section : Section to be shown
Setting value Description
access-list Access list related
http-server HTTP server related
interface Interface related
ip IP related
ipv6 IPv6 related
key Authentication key related
l2ms L2MS related
lldp LLDP related
snmp SNMP related
spanning-tree STP related
ssh-server SSH server related
switch Switch setting related
telnet-sever TELNET server related
[Input mode]
priviledged EXEC mode, individual configuration mode
[Description]
Shows the currently-operating settings (running configuration).
If section is not specified, all settings are shown.
[Example]
Show the running configuration.
SWR2311P#show running-config
!
interface port1.1
switchport
...
!
line con 0
line vty 0 7
!
end
SWR2311P#
4.3.4 Show startup configuration
[Syntax]
show startup-config [config_num]
[Parameter]
config_num : Configuration number
32 | Command Reference |
Maintenance and operation functions