Yamaha L2 - Set SNMP User

[Initial value]
none
[Input mode]
global configuration mode
[Description]
Sets the user group.
Access to MIB objects not included in the MIB view specified by this command is prohibited.
The MIB view is defined by the snmp-server view command.
The maximum number of entries is 16.
If this command is executed with the "no" syntax, the specified group setting is deleted.
[Example]
Create the user group "admins," and grant users belonging to the "admins" group full access rights to the "most" view.
SWR2311P(config)#snmp-server group admins priv read most write most
Create the user group "users," and grant users belonging to the "users" group read access rights to the "standard" view.
SWR2311P(config)#snmp-server group users auth read standard
4.10.8 Set SNMP user
[Syntax]
snmp-server user user group [auth auth auth_path [priv priv priv_path]]
no snmp-server user user
[Keyword]
auth : Set the authentication algorithm
priv : Set the encryption algorithm
[Parameter]
user : User name (maximum 32 characters)
group : Group name (maximum 32 characters)
auth : Authentication algorithm
Setting value Description
md5 HMAC-MD5-96
sha HMAC-SHA-96
auth_pass : Authentication password (8 or more characters, maximum 32 characters)
priv : Encryption algorithm
Setting value Description
des DES-CBC
aes AES128-CFB
priv_pass : Encryption password (8 or more characters, maximum 32 characters)
[Initial value]
none
[Input mode]
global configuration mode
Command Reference | Maintenance and operation functions | 55