Yamaha L2 - Clear Dynamic Entry; Set Static Entry

SWR2311P(config)#mac-address-table ageing-time 600
6.1.3 Clear dynamic entry
[Syntax]
clear mac-address-table dynamic
clear mac-address-table dynamic adress mac-addr
clear mac-address-table dynamic vlan vlan-id
clear mac-address-table dynamic interface ifname [instance inst]
[Keyword]
address : Specifies the MAC address
vlan : Specifies the VLAN ID
interface : Specifies the interface
instance : Specifies the MST instance
[Parameter]
mac-addr : hhhh.hhhh.hhhh (h is hexadecimal)
Applicable MAC address
ifname : Name of LAN/SFP port or logical interface
Applicable interface
vlan-id : <1-4094>
Applicable VLAN ID
inst : <1-63>
Applicable MST instance ID
[Input mode]
priviledged EXEC mode
[Description]
Deletes a dynamic entry from the MAC address table.
If a keyword is specified, only the entries that match the applicable conditions are deleted.
If no keyword is specified, all dynamic entries are deleted.
[Example]
Delete the dynamic entry whose MAC address is 00a0.de11.2233.
SWR2311P#clear mac-address-table dynamic address 00a0.de11.2233
6.1.4 Set static entry
[Syntax]
mac-address-table static mac-addr action ifname [vlan vlan-id]
no mac-address-table static mac-addr action ifname
[vlan vlan-id]
[Keyword]
vlan : Specifies the VLAN ID
[Parameter]
mac-addr : hhhh.hhhh.hhhh (h is hexadecimal)
Applicable MAC address
action : Action applied to frames addressed to mac-addr
Setting value Description
forward Forward
158 | Command Reference |
Layer 2 functions