Yamaha L2 - 4.20 L2 MS (Layer 2 management service) settings

Multiple Spanning Tree Protocol
Remote VID Usage Digestt : 0
Remote Management Vlan : 0
Link Aggregation Status : Disabled
Link Aggregation Port ID : 0
8023 ORIGIN SPECIFIC TLVs
AutoNego Support : Supported Enabled
AutoNego Capability : 27649
Operational MAU Type : 30
Power via MDI Capability (raw data)
MDI power support : 0x0
PSE power pair : 0x0
Power class : 0x0
Type/source/priority : 0x0
PD requested power value : 0x0
PSE allocated power value : 0x0
Max Frame Size : 1522
LLDP-MED TLVs
MED Capabilities :
Capabilities
Network Policy
MED Capabilities Dev Type : End Point Class-3
MED Application Type : Reserved
MED Vlan id : 0
MED Tag/Untag : Untagged
MED L2 Priority : 0
MED DSCP Val : 0
MED Location Data Format : ECS ELIN
Latitude Res : 0
Latitude : 0
Longitude Res : 0
Longitude : 0
AT : 0
Altitude Res : 0
Altitude : 0
Datum : 0
LCI length : 0
What : 0
Country Code : 0
CA type : 0
MED Inventory
SWR2311P#
4.19.20 Clear LLDP frame counters
[Syntax]
clear lldp counters
[Input mode]
priviledged EXEC mode
[Description]
Clear the LLDP frame counter of all ports.
[Example]
Clear the LLDP frame counter.
SWR2311P>clear lldp counters
4.20 L2MS (Layer 2 management service) settings
4.20.1 Move to L2MS mode
[Syntax]
l2ms configuration
[Input mode]
global configuration mode
Command Reference | Maintenance and operation functions | 93