[Description]
Moves to L2MS mode in order to make L2MS settings.
[Note]
To return from L2MS mode to global configuration mode, use the exit command. To return to priviledged EXEC mode, use the
end command.
[Example]
Move to L2MS mode.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#
4.20.2 Set L2MS function
[Syntax]
l2ms enable
l2ms disable
no l2ms
[Keyword]
enable : Use the L2MS function
disable : Don't use the L2MS function
[Initial value]
l2ms enable
[Input mode]
L2MS mode
[Description]
Sets whether to use the L2MS function.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
In order for a change to be applied, the system must be restarted.
[Example]
Use the L2MS function.
SWR2311P(config)#l2ms configuration
SWR2311P(config-l2ms)#l2ms enable
4.20.3 Set role of L2MS function
[Syntax]
l2ms role role
no l2ms role
[Parameter]
role : Role of L2MS function
Setting value Description
master
Operate as an L2MS master that sets and
controls SWR series units that are connected
subordinate to it
slave
Be managed from a Yamaha device that is
operating as an L2MS master, such as an
SWR2311P-10G unit that is set as the L2MS
master
[Initial value]
l2ms role slave
94 | Command Reference |
Maintenance and operation functions
To Next Page
Loading...
