Yamaha L2 - Show Currently-Executing Processes; Show Technical Support Information

• Fan status
•
Fan speed
• Firmware file
• Startup configuration file
• Serial baud rate
• Boot time
• Current time
• Elapsed time from boot
• Temperature status
• Temperature
[Example]
Show operating information.
SWR2311P>show environment
SWR2311P-10G BootROM Ver.1.00
SWR2311P Rev.2.02.06 (Tue Mar 13 08:41:39 2018)
main=SWR2311P-10G ver=00 serial=S00000000 MAC-Address=00a0.de00.0000
CPU: 7%(5sec) 8%(1min) 8%(5min) Memory: 18% used
Fan status: Normal
Fan speed: FAN1=4444RPM FAN2=4444RPM FAN3=4444RPM
Startup firmware: exec0
Startup Configuration file: config0
Serial Baudrate: 9600
Boot time: 2018/01/01 11:13:44 +09:00
Current time: 2018/01/02 16:19:43 +09:00
Elapsed time from boot: 1days 05:06:04
Temperature status: Normal
Temperature: 28 degree C
SWR2311P>
4.5.3 Show currently-executing processes
[Syntax]
show process
[Input mode]
priviledged EXEC mode
[Description]
Shows all currently-executing processes.
[Example]
Show currently-executing processes.
SWR2311P#show process
4.5.4 Show technical support information
[Syntax]
show tech-support
[Input mode]
priviledged EXEC mode
[Description]
Shows a list of the results of executing the following commands useful for technical support.
•
show running-config
• show environment
• show inventory
• show boot all
• show logging
• show process
• show users
• show interface
38 | Command Reference |
Maintenance and operation functions