[Parameter]
type : Type of map to show
Setting value Description
policy Show policy map status information
class Show class map status information
name : The name of the policy map (or class map) to show. If this is omitted, all policy maps (or class maps)
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows policy map or class map status information.
By using this command, you can obtain information about the combination of policy maps or class maps, such as the LAN/SFP
ports to which a policy map is applied, or the policy maps to which a class map is registered.
The following content is displayed.
policy-map
Item Display information
input port List of LAN/SFP ports to which the policy map is applied
edit/erase Whether policy-map/no policy-map can be executed
attach limitation Whether attachment is possible for each trust mode
class-map
Item Display information
policy-map asociation List of policy maps to which the class map is associated
edit/erase Whether class-map/no class-map can be executed
attach limitation Whether attachment is possible for each trust mode
Use the show policy-map and show class-map commands to check the settings of the policy map or class map.
[Note]
In order to execute this command, QoS must be enabled.
[Example]
Show the status of policy map "policy1".
SWR2311P#show qos map-status policy policy1
policy1 status
input port : port1.3
edit/erase : Disable
attach limitation
CoS trust mode : Enable
DSCP trust mode : Enable
Port-Priority trust mode : Disable
Show the status of class map "class1".
SWR2311P#show qos map-status class class1
class1 status
policy-map association : policy1 (Detached)
edit/erase : Disable
attach limitation
CoS trust mode : Enable
DSCP trust mode : Enable
Port-Priority trust mode : Disable
Command Reference | Traffic control | 255
To Next Page
