Yamaha MX360 - Electrical

MAINTENANCE SPECIFICATIONS
7-7
1
2
3
4
5
6
7
8
9
10
SPECIFICATIONS
ELECTRICAL
Ignition system:
Ignition timing at 3600 r/min BTDC 20 ± 3 (MZ360/MX360)
BTDC 15 ± 3 (MZ400)
Primary coil resistance 0.64–0.96 
Secondary coil resistance 9.36–14.04 k
Spark plug cap resistance 3.75–6.25 k at 20 C (68 F)
Choke solenoid resistance 26  ± 5 %
(MZ360)
TCI unit air gap 0.4–0.6 mm (0.0157–0.0236 in)
Minimum ignition spark gap 6.0 mm (0.24 in)
Charging coil resistance 1.6  ( ± 20 %)
Electric starting system (Equipped models):
Depth of insulator 0.4–0.8 mm (0.0157–0.0315 in)
Insulation resistance More than 1.0 M
Brush spring pressure 11.73–15.35 N (1.196–1.565 kgf, 2.637–3.451 lbf)
Brush wear limit length 6.0 mm (0.2362 in)
Holding coil resistance 1.1  ( ± 20 %)
Pull-in coil resistance 0.5  ( ± 20 %)