Yamaha MX360 - Air Filter and Foam Element Maintenance

PERIODIC MAINTENANCE
2-6
1
2
3
4
5
6
7
8
9
10
PERIODIC CHECKS AND ADJUSTMENTS
5.
Fill:
• Engine oil
Make sure to fill with the recommended engine oil
from the oil filler hole in the crankcase.
6.
Check:
• Engine oil level
(Refer to “ENGINE OIL LEVEL” on page 2-4)
AIR FILTER ELEMENT (MZ360/MZ400)
1.
Remove:
• Air filter cover screw “1”
• Air filter cover “2”
2.
Remove:
• Air filter element “3”
3.
Check:
• Air filter element
Damage  Replace.
Clogged  Wash the element with white kerosene,
and then dry it thoroughly.
Oil the element and squeeze out the excess oil.
0 10 30 50 70 90 110130 °F
-20 -10 0 10 20 30 40 50 °C
SAE 10W-40
SAE 10W-30
Recommended oil brand:
YAMALUBE
Available oil grade:
API SE type or higher JASO MA or MB
Available viscosity index:
10W-30 or 10W-40
Engine oil quantity:
1.0 L (1.06 US qt, 0.88 Imp.qt)
Be sure not to run the engine without air filter element.
Otherwise this can result in excessive piston and/or
cylinder wear.
NOTICE
1
2
3
Do not wash the element with gasoline or with acidic,
alkalic, or organic solvents.
Do not wring out the element. This could cause it to
tear.
WARNING
NOTICE