Yamaha MX360 - Cylinder Head Cover, Cylinder Head

CYLINDER HEAD COVER, CYLINDER HEAD
3-33
1
2
3
4
5
6
7
8
9
10
ENGINE
CYLINDER HEAD COVER, CYLINDER HEAD
Order Job/Parts to remove Q’ty Remarks
Removing the cylinder head cover, cyl-
inder head
Remove the parts in the order listed.
Fuel tank
Refer to “FUEL TANK (Equipped models)” on
page 3-5.
Muffler Refer to “MUFFLER” on page 3-7.
Air filter Refer to “AIR FILTER” on page 3-3.
Carburetor
Refer to “REMOVING THE CARBURETOR”
on page 4-1.
Flywheel cover Refer to “FLYWHEEL” on page 3-17.
1 Spark plug cap 1
2 Spark plug 1
3 Air filter case stay 1 MX360 only
4 Cylinder head cover 1
5 Cylinder head cover gasket 1
6 Cylinder air shroud 1
7 Locknut 2
8 Adjuster 2
9 Screw 2
6
5
4
3
2
7
8
9
7
8
9
1
7 N・m (0.7 kgf・m, 5.2 lb・ft)
11 N・m (1.1 kgf・m, 8.1 lb・ft)
20 N・m (2.0 kgf・m, 15 lb・ft)
2.3 N・m (0.23 kgf・m, 1.7 lb・ft)
50 N・m (5.0 kgf・m, 37 lb・ft)
12 N・m (1.2 kgf・m, 8.9 lb・ft)
1st
2nd