WIRE ROUTING DIAGRAM
7-15
1
2
3
4
5
6
7
8
9
10
SPECIFICATIONS
Color code
1. Spark plug cap 5. Ground terminal
2. Wire harness protector 6. Engine switch
3. Oil warning unit 7. Oil warning light
4. Engine switch lead (ground) 8. High tension cord
A. The spark plug cap should face the direction indicated in the
illustration.
B. After passing through the lead wire, pull it lightly in the direction of the arrow.
C. Route the lead as shown.
D. The lead is black and the protector is gray.
E. Attach the projection of the oil warning unit to the hole of the bracket.
F. Make sure that the gap between the end of the wire harness protector and end of the crankcase is 5
mm
(0.19 in) or more.
G. Fasten the ground terminal and engine switch together.
H. Screw in the high tension cord until it touches the spark plug cap.
B Black B/W Black/White
To Next Page
Loading...
