Yamaha MX775 - Checking the Flywheel and Stator Coil Assembly; Installing the Flywheel and Stator Coil Assembly

3-17
1
2
3
4
5
6
7
8
9
10
ENGINE
FLYWHEEL AND STATOR COIL ASSEMBLY
8. Remove:
• Flywheel “1”
• Woodruff key
TIP
• Remove the flywheel “1” using the heavy duty puller “2”.
• Fully tighten the tool holding bolts, making sure the tool
body is parallel with the flywheel. If necessary, one bolt
may be backed out slightly to level the tool body.
9. Remove:
• Stator coil assembly
CHECKING THE FLYWHEEL AND STATOR COIL
ASSEMBLY
1. Check:
• Flywheel “1”
• Stator coil assembly “2”
Damage  Replace.
INSTALLING THE FLYWHEEL AND STATOR COIL
ASSEMBLY
1. Install:
• Stator coil assembly
• Stator coil assembly bolts
2. Install:
• Woodruff key
• Flywheel
1
2
Heavy duty puller:
YU-33270-B
12
Stator coil assembly bolt:
7 N·m (0.7 kgf·m, 5.1 lb·ft)
T
R
.
.