YASKAWA FS100 - User ID; Changing a User ID

2 Security System
FS100 2.1 Protection Through Security Mode Settings
2-7
2.1.2 User ID
User ID is requested when Editing Mode or Management Mode is
operated.
User ID must be between 4 characters and 8, and they must be numbers
and symbols. (“0 to 9”,“-” and “.”)
2.1.2.1 Changing a User ID
In order to change the user ID, the FS100 must be in Editing Mode or
Management Mode. Higher security modes can make changes the user
ID of to lower security modes.
1. Select {SETUP} under the main menu.
– The sub menu appears.
2. Select {USER ID}.
– The USER ID window appears.