YASKAWA FS100 - 5 Replacing Parts; 5.1 Fuse Replacement

5 Replacing Parts
FS100 5.1 Fuse Replacement
5-1
5 Replacing Parts
5.1 Fuse Replacement
WARNING
• To prevent anyone inadvertently turning ON the power supply
(including a pressurized air), put up a warning sign such as "DO
NOT TURN ON THE POWER" before the maintenance, inspection,
or wiring operation.
WARNING
• Maintenance and inspections should be carried out by the qualified
worker.
Failure to observe this caution may result in electric shock or injury.
Following fuses
1)
are mounted in the FS100.
Fuse name Where to mount Type Manufacturer
I/O power supply fuse
(F1: left side of the following figure)
Front side of the FS100 0312.600, 250V, 0.6A
6.3 dia. x 32 mm,
fast-blow type
Littel Fuse Ltd.
Fuse for regenerative resistor fan
protection
2)
(F2: right side of the following
figure)
Front side of the FS100 250V, 1A
5 dia. x 20 mm
Littel Fuse Ltd.
1 A fuse is delivered with the FS100 before shipment for replacement.
2 Fuse for regenerative resistor fan protection is mounted on the FS100 for HP20Fonlly.