YASKAWA FS100 - 3 Maintenance and Inspections; 3.1 Daily Inspections

3 Maintenance and Inspections
FS100 3.1 Daily Inspections
3-1
3 Maintenance and Inspections
Operator’s manual for daily inspection and parts replacement are
explained in this section. Be sure to read and understand this instruction
before operating the FS100.
To ensure correct and safe operation, carefully read the FS100
INSTRUCTIONS (RE-CTO-A218).
3.1 Daily Inspections
WARNING
• Maintenance and inspections should be carried out by the qualified
worker.
Failure to observe this caution may result in electric shock or injury.
WARNING
• Do not touch the cooling fan or other equipment while the power is
turned ON.
Failure to observe this caution may result in electric shock or injury.