YASKAWA FS100 - 10.2 Particular Error Message

10 Error
FS100 10.2 Particular Error Message
10-16
10.2 Particular Error Message
Apart from ordinary alarms or errors, some may display an error box
message on the programming pendant. This message is displayed,
when the system of the programming pendant becomes unauthorized.
10.2.1 Message
10.2.1.1 Fatal Error
This message is displayed when the fatal error occurs.
The message is “Fatal application Error” although the content of the
message box varies depending on the occurence status.
The programming pendant becomes either of following states
1. The window becomes inoperable.
2. The window disappears and blue background appears.