11 LED Indicator on Each Circuit Board
FS100
11-1
11 LED Indicator on Each Circuit Board
Before the check of LED indicator
In principle, the door must not be opened to prevent electric shock while
power is ON. However, open the door with extreme care only if it is
required to check the LED display on each circuit board for maintenance.
• To perform this operation, it is required to open the door of the
control box while power is ON.
• A heavy current (AC200V) flows inside the control box. Do not touch
the internal unit.
Failure to observe this warning may result in electric shock.
• Close the door as soon as the maintenance work such as LED
check is completed.
Failure to observe this warning may result in electric shock.
• Close the door as soon as the maintenance work is completed.
Failure to observe this warning may result in electric shock.
To Next Page
Loading...
