YASKAWA FS100 - Search from the Menu

8 System Diagnosis
FS100 8.3 Input/Output Status
8-10
8.3.6.2 Search from the Menu
1. Select {EDIT} under the menu in the UNIVERSAL/SPECIFIED INPUT/
OUTPUT window.
– The pull-down menu appears.
2. Select {SEARCH SIGNAL NO.}.
– Numeric values can now be entered.
3. Enter the signal number to be searched.
– Type the signal number in the number input line.
4. Press [ENTER] to start the search.
– The page where the signal number exists appears.