YASKAWA FS100 - External Memory Equipment

10 Error
FS100 10.1 Error Message
10-9
10.1.4 External Memory Equipment
Error No. Data Error Message Contents
3021 - CompactFlash not inserted into
CompactFlash slot(PP)
3022 - USB media not inserted
3040 - File not saved on the media
3050 - File saved on the media
3060 - Out of memory on the media
3070 - Number of files on the media
3080 - I/O error on the media
3090 -* Transmission error with the media
1 Framing error
2 Overrun error
3 Parity error
4 Data code error
5 Data read error
6 Data write error
7 Data time out
8 Serial I/O error
9 Error other than described above
3100 - Total checksum error
3110 - Syntax error
3120 * HEX code error
1 Specification error of data decode
2 Specification error of EOF record
3 Record type error
4 Total check error of record
3130 - Verify error
3140 - Wrong pseudo instruction
3150 * Concurrent I/O record error
1 Format error
2 Ladder program is too long
3 Exceed the range of the data
4 Specification error of channel No.
5 Specification error of relay No.
6 Timer value error
3150 7 Specification error of timer No
3160 - Cannot load illegal system data
3170 * Condition file data error
1 Format error
2 Specified file No. is omitted
3 Specified tool No. is omitted
4 User file is not registered.
3180 - Concurrent I/O data transmission
error