10 Error
FS100 10.1 Error Message
10-10
3190 * Error in JOB data record
1 Record on the number of position data (NPOS)
is wrong for the format.
2 Record on the user coordinate No. (USER) is
wrong for the format.
3 Record on the tool No. (TOOL) is wrong for the
format.
4 Record on the position data section is wrong for
the format.
5 Record on the robot type of XYZ data (RCONF)
is wrong for the format.
6 Date (DATE) record is wrong for the format.
7 Comment (COMM) record is wrong for the
format.
8 Record on the JOB attribute data (ATTR) is
wrong for the format.
9 Control group (GROUP) record is wrong for the
format.
10 Local variable (LVARS) record is wrong for the
format.
11 JOB argument (JARGS) record is wrong for the
format.
12 Record on the teaching coordinates for relative
job (FRAME) is wrong for the format.
13 Position data coordinates do not match relative
job coordinates.
3200 - NOP or END instruction not found
3210 - Position No. storage area not found
3220 * Syntax error in instruction data
2 Interior control error
3 Undefined instruction/tag
4 Instruction/tag shortage
5 Disuse instruction/tag
6 Sub instruction
Error No. Data Error Message Contents
To Next Page
Loading...
