YASKAWA FS100 - 10.2.1.2 Application Transaction Error; 10.2.1.3 Other Errors

10 Error
FS100 10.2 Particular Error Message
10-17
10.2.1.2 Application Transaction Error
This message is displayed when the system or the software of the
programming pendant becomes unauthorized due to unexpected
transaction or failure in softaware transaction, etc.
The message in the message box varies depending on the occurence
status.
Followings are the messages possible to occure.
The programming pendant becomes either of following states
1. The window becomes inoperable.
2. Press {OK} button to disappear the message box and it becomes
operable.
10.2.1.3 Other Errors
Other errors than mentioned above, some can trigger the message box.
Message Meaning
syntax error There is an unauthorized part in
internal processing discription.
expression too complex(stack overflow) Internal stack has overflowed.
function nesting depth exceeded Nesting of internal processing is
unauthorized.
bad radix The cardinal number used is
unauthorized.
divide by 0 Memory is running out.
out of memory Memoriy is insufficient.
argument list does not match a function The internal processing of the
pendant program is unauthorized.
register is not available Specified an unavailable system
data.