YASKAWA FS100 - Page 93

9Alarm
FS100 9.3 Display of Alarm Details
9-6
 {Right/Left} button
This button appears when there can be several “cause”s and “measure”s
to one alarm. Press this to right/left ward to alternate the “cause” and the
“measure”.
 Cause
Displays the cause of an alarm.
 Measure
Displays the recovery method from the alarming state.
 {Reset}button
Press this button to reset the alarm.
 {Page} button
Press this button to display the page number inputting area.
This area appears when several alarms occur at a time.