YASKAWA SGDA series - Page 267

SERVO SELECTION AND DATA SHEETS
5.4.1Servomotor Dimensional Drawings
256
4) The quoted allowable radial load is the value at a position 35 mm (1.38 in.) from the mo-
tor mounting surface.
5) The electromagnetic brake is only to hold the load in position and cannot be used to stop
the motor.
· Details of Motor and Encoder Plugs (Common for 30 W (0.04 HP) to 750 W (1.01 HP)
C channel output
Socket: 170362 -1 or 170366-1
U phase Red
V phase White
W phase Blue
FG Green/Yellow
Motor
Plug
Pin: 170360-1 or 170364-1
(17359-1 or 170363-1: 30, 50, or
100 W only)
Cap: 172160-1
Encoder Plug
Incremental Encoder Wiring Specifications
A channel output Blue
A channel output Blue/Black
B channel output Yellow
B channel output Yellow/Black
Green
Green/Black
Gray
Red
FG (Frame Ground) Orange
Plug: 172169-1 (AMP)
Pin: 170359-1 or 170363-1
Plug : 172168-1 (AMP)
Connected to
Connected to
Cap :172161-1
Socket: 170361-1 or 170365-1
1
2
3
4
1
2
3
4
5
6
7
8
9
C channel output
+5V (power supply)
0V (power supply)
Motor Wiring Specifications
Brake terminal Red5
Brake terminal Black6
5