YASKAWA Sigma-V Series User Manual

11.2 List of Parameters
11-31
11
Appendix
Pn512
2 Output Signal Inverse Setting 0000 to 0111 − 0000 After restart Setup 3.4.2
Pn513
2 Output Signal Selection 4 0000 to 0333 − 0000 After restart Setup −
(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When Enabled
Classifi-
cation
Reference
Section
Output Signal Inversion for CN1-25 or -26 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-27 or -28 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Output Signal Inversion for CN1-29 or -30 Terminal
0 Does not inverse outputs.
1 Inverses outputs.
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.

Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.


YASKAWA Sigma-V Series Specifications

General

Brand	YASKAWA
Model	Sigma-V Series
Category	Servo Drives
Language	English