Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
86
phone_setting.phone_lock.unlock_pin
characters within 15 digits
Description:
Configures the password for unlocking the phone.
Web User Interface:
Features->Phone Lock->Phone Unlock PIN (0~15 Digit)
Phone User Interface:
Menu->Settings->Basic Settings->Change PIN
phone_setting.phone_lock.lock_time_out
Description:
Configures the interval (in seconds) to automatically lock the phone.
The default value is 0 (the phone is locked only by long pressing the pound key or
pressing the phone lock key).
Note: It works only if the parameter “phone_setting.phone_lock.enable” is set to
1(Enabled).
Web User Interface:
Features->Phone Lock->Phone Lock Time Out (0~3600s)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Phone
Lock->Lock Time Out
Phone Lock Type
The following table lists the operation behavior when configuring the type of phone
lock:
Allow Behavior: You are allowed to
press the desired Line Key (key type is
line) or the Speakerphone key to enter
the pre-dialing screen.
Keys not Locked: Line keys (key type is
line), digit keys, volume key and
Speakerphone key.
The Menu
key (key
type is
menu) is
locked.
Allow Behavior: You are allowed to
answer or reject incoming calls.
To Next Page
Loading...
Need help?
General
