Yealink T29G

Configuring Basic Features
97
Parameters
Permitted Values
Default
local_time.summer_time
0, 1 or 2
2
Description:
Configures Daylight Saving Time (DST) feature.
0-Disabled
1-Enabled
2-Automatic
Web User Interface:
Settings->Time & Date->Daylight Saving Time
Phone User Interface:
Menu->Settings->Basic Settingss->Time & Date->SNTP Settings->Daylight Saving
local_time.dst_time_type
0 or 1
0
Description:
Configures the DST time type.
0-DST by Date
1-DST by Week
Note: It works only if the parameter “local_time.summer_time” is set to 1 (Enabled).
Web User Interface:
Settings->Time & Date->Fixed Type
Phone User Interface:
None
local_time.start_time
Time
1/1/0
Description:
Configures the start time of the DST.
Value formats are:
 Month/Day/Hour (for DST by Date)
 Month/Week of Month/Day of Week/Hour of Day (for DST by Week)
If “local_time.dst_time_type” is set to 0 (DST by Date), use the mapping:
Month: 1=January, 2=February,…, 12=December
Day: 1=the first day in a month,…, 31= the last day in a month
Hour: 0=0am, 1=1am,…, 23=11pm
If “local_time.dst_time_type” is set to 1 (DST by Week), use the mapping: