Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
168
Parameter:
features.auto_answer_delay
Local
Web User Interface
Configure auto answer.
Navigate to:
http://<phoneIPAddress>/servlet
?p=account-basic&q=load&acc
=0
Specify a period of delay time for
auto answer.
Navigate to:
http://<phoneIPAddress>servlet?
p=features-general&q=load
Phone User Interface
Configure auto answer.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.auto_answer
0 or 1
0
Description:
Enables or disables auto answer feature for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer an incoming call.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).
X ranges from 1 to 6 (for SIP-T41P/T27P).
X ranges from 1 to 3 (for SIP-T23P/G).
X ranges from 1 to 2 (for SIP-T21(P) E2).
Note: The IP phone cannot automatically answer the incoming call during a call even
if auto answer is enabled.
Web User Interface:
Account->Basic->Auto Answer
Phone User Interface:
For SIP-T42G/T41P/T27P/T23P/T23G/T21(P) E2:
Menu->Features->Auto Answer->Status
For SIP-T46G/T29G:
Menu->Features->Auto Answer->Line X->Auto Answer