Description:
Configures the delay time (in seconds) before the IP phone automatically answers
an incoming call.
Web User Interface:
Features->General Information->Auto-Answer Delay (1~4s)
Phone User Interface:
None
To configure auto answer via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic.
4. Select the desired value from the pull-down list of Auto Answer.
5. Click Confirm to accept the change.
To configure a period of delay time for auto answer via web user interface:
1. Click on Features->General Information.
To Next Page
Loading...
