Yealink T29G

Configuring Basic Features
173
CSeq: 1 INVITE
Contact: <sip:1009@10.3.20.14:5060>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER,
PUBLISH, UPDATE, MESSAGE
Max-Forwards: 70
User-Agent: Yealink SIP-T23G 44.80.0.20
Allow-Events: talk,hold,conference,refer,check-sync
P-Preferred-Identity: <sip:1009@10.3.5.199>
Privacy: id
Content-Length: 302
The anonymous call on code and anonymous call off code configured on IP phones are
used to activate/deactivate the server-side anonymous call feature. They may vary on
different servers. Send Anonymous Code feature allows IP phones to send anonymous
on/off code to the server.
Procedure
Anonymous call can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure anonymous call.
Parameters:
account.X.anonymous_call
account.X.send_anonymous_code
account.X.anonymous_call_oncode
account.X.anonymous_call_offcode
Local
Web User
Interface
Configure anonymous call.
Navigate to:
http://<phoneIPAddress>/servlet?p=ac
count-basic&q=load&acc=0
Phone User
Interface
Configure anonymous call.