Yealink T29G - Page 188

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
174
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.anonymous_call
0 or 1
0
Description:
Enables or disables anonymous call feature for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will block its identity from showing up to the
callee when placing a call. The callee’s phone LCD screen presents anonymous
instead of the caller’s identity.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).
X ranges from 1 to 6 (for SIP-T41P/T27P).
X ranges from 1 to 3 (for SIP-T23P/G).
X ranges from 1 to 2 (for SIP-T21(P) E2).
Web User Interface:
Account->Basic->Local Anonymous
Phone User Interface:
Menu->Features->Anonymous Call->Local Anonymous
account.X.send_anonymous_code
0 or 1
0
Description:
Configures the IP phone to send anonymous on/off code to activate/deactivate the
server-side anonymous call feature for account X.
0-Off Code
1-On Code
If it is set to 0 (Off Code), the IP phone will send off code to deactivate the
server-side anonymous call feature when you enable or disable local anonymous
feature on the phone.
If it is set to 1 (On Code), the IP phone will send on code to activate the server-side
anonymous call feature when you enable or disable local anonymous feature on the
phone.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).
X ranges from 1 to 6 (for SIP-T41P/T27P).