Yealink T29G - Page 366

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
352
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<y0000000000xx>.cf
g
Configure the listening multicast
address.
Parameters:
multicast.listen_address.X.ip_address
multicast.listen_address.X.label
Configure Paging Barge and Paging
Priority Active features.
Parameters:
multicast.receive_priority.enable
multicast.receive_priority.priority
Local
Web User Interface
Configure the listening multicast
address.
Configure Paging Barge and Paging
Priority Active features.
Navigate to:
http://<phoneIPAddress>/servlet?p=c
ontacts-multicastIP&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
multicast.listen_address.X.ip_address
(X ranges from 1 to 10)
IP address: port
Blank
Description:
Configures the multicast address and port number that the IP phone listens to.
Example:
multicast.listen_address.1.ip_address = 224.5.6.20:10008
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Web User Interface:
Directory->Multicast IP->Listening Address
Phone User Interface:
None
multicast.listen_address.X.label
(X ranges from 1 to 10)
String within 99
characters
Blank