Yealink T29G Administrator's Guide

Configuring Advanced Features
411
3. Enter the desired time interval in the Packet Interval (1~3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.
To configure LLDP feature via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->LLDP->LLDP Status.
2. Press or , or the Switch soft key to select the desired value from the LLDP
Status field.
3. Enter the priority value (1-3600s) in the Packet Interval field.
4. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
CDP (Cisco Discovery Protocol) allows IP phones to receive and/or transmit
device-related information from/to directly connected devices on the network that are
also using the protocol, and store the information about other devices.
Procedure
CDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure CDP.
Parameters:
network.cdp.enable
network.cdp.packet_interval
Local
Web User Interface
Configure CDP.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)