Yealink T29G

Configuring Advanced Features
417
Parameters
Permitted Values
Default
->Network->VLAN->PC Port->VID
network.vlan.pc_port_priority
Integer from 0 to 7
0
Description:
Configures VLAN priority for the PC (LAN) port.
7 is the highest priority, 0 is the lowest priority.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN >PC Port->Priority
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->PC Port->Priority
network.vlan.dhcp_enable
0 or 1
1
Description:
Enables or disables DHCP VLAN discovery feature on the IP phone.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Active
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->DHCP VLAN
network.vlan.dhcp_option
Integer from 128 to 254
132
Description:
Configures the DHCP option from which the IP phone will obtain the VLAN settings.
You can configure at most five DHCP options and separate them by commas.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->DHCP VLAN->Option(128-254)