Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
416
Parameters
Permitted Values
Default
network.vlan.internet_port_priority
Integer from 0 to 7
0
Description:
Configures VLAN priority for the Internet (WAN) port.
7 is the highest priority, 0 is the lowest priority.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->WAN Port->Priority
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->WAN Port->Priority
network.vlan.pc_port_enable
0 or 1
0
Description:
Enables or disables VLAN for the PC (LAN) port.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->Active
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->PC Port->VLAN Status
network.vlan.pc_port_vid
Integer from 1 to 4094
1
Description:
Configures VLAN ID for the PC (LAN) port.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->VLAN->PC Port->VID (1-4094)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)