Yealink T29G - Page 446

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
432
Parameters
Permitted
Values
Default
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Current Time
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_local_call_id.enable
0 or 1
1
Description:
Enables or disables the phone to display Local User on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Local User
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_remote_call_id.enable
0 or 1
1
Description:
Enables or disables the phone to display Remote User on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Remote User
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_local_codec.enable
0 or 1
1