Yealink T29G - Page 447

Configuring Advanced Features
433
Parameters
Permitted
Values
Default
Description:
Enables or disables the phone to display Local Codec on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Local Codec
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_remote_codec.enable
0 or 1
1
Description:
Enables or disables the phone to display Remote Codec on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Remote Codec
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_jitter.enable
0 or 1
1
Description:
Enables or disables the phone to display Jitter on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->Jitter
Phone User Interface:
None