Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
526
http://<phoneIPAddress>/servlet?p
=settings-config&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
syslog.mode
0, 1 or 2
0
Description:
Configures the IP phone to export log files to an FTP/TFTP server (provisioning server),
syslog server or the local system.
0-Local
1-Syslog Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None
syslog.server
IP address or
domain name
Blank
Description:
Configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
syslog.server = 192.168.1.50
Note: It works only if the parameter “syslog.mode” is set to 1 (Syslog Server). If you
change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
syslog.log_upload_period
Integer from 30 to
2592000
30
Description:
Configures the period of the log upload (in seconds) to the provisioning server.