Yealink T29G - Page 542

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
528
Parameters
Permitted Values
Default
None
syslog.ftp.append_limit_mode
1 or 2
1
Description:
Configures the phone to stop log upload or delete the old log when the log on the
provisioning server reaches the max size.
1-Append Delete
2-Append Stop
Note: It works only if the parameter “syslog.mode” is set to 2 (FTP/TFTP Server). If
you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Configuration->Append Limit Mode
Phone User Interface:
None
syslog.bootlog_upload_wait_time
Integer from 1 to
86400
120
Description:
Configures the waiting time (in seconds) before the phone uploads the log file to
the provisioning server.
Example:
syslog.bootlog_upload_wait_time = 121
Note: It works only if the parameter “syslog.mode” is set to 2 (FTP/TFTP Server). If
you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
None
Phone User Interface:
None
syslog.log_level
Integer from 0 to 6
3
Description:
Configures the detail level of syslog information to be exported. If you change this
parameter, the IP phone will reboot to make the change take effect.