Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
64
Parameters
Permitted
Values
Default
Phone User Interface:
None
features.text_message_popup.enable
0 or 1
1
Description:
Enables or disables the IP phone to display the pop-up message box when it receives
a new text message.
0-Disabled
1-Enabled
Web User Interface:
Features->Notification Popups->Display Text Message Popup
Phone User Interface:
None
To configure the notification popups via web user interface:
1. Click on Features->Notification Popups.
2. Select the desired value from the pull-down list of Display Voice Mail Popup.
3. Select the desired value from the pull-down list of Display Missed Call Popup.
4. Select the desired value from the pull-down list of Display Forward Call Popup.
5. Select the desired value from the pull-down list of Display Text Message Popup.
6. Click Confirm to accept the change.