13-28
IM 701310-01E
13.9 Saving Analysis Results
CAUTION
Do not remove the storage medium (disk) or turn OFF the power when the access
indicator is blinking. Doing so can damage the storage medium or destroy the data
on the medium.
Procedure
RESET
SET
7 8 9
BS
PRINT
FILE
SHIFT
SYSTEM
EXP
CLEAR
M
MENU
D E F X
k m
u n p
4 5 6
1 2 3
0
+/-
CA B
1.
Press FILE.
Selecting the Save Destination Storage Media/Directory
2.
Use the rotary knob to select the save destination storage medium.
3.
Press the Open soft key to confirm the storage medium.
When saving to a directory in the storage medium, select the directory in the same manner
as described above, and then press the
Open
soft key to confirm the directory.
The selected medium/directory is displayed in “Path=......” located in the upper-left of the
File List window.
Press the Up soft key to move to the parent directory.
To Next Page
Loading...
Need help?
General
