IM 04P01B01-01E
7-18
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT + key to select End and then press the key. Press
the
key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the
key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Explanation
Keylock
Sets whether to use or not use the key lock function.
If Not is selected, the setup ends here.
Password
Sets the password for releasing the key lock. Set the password using numbers and
spaces within 4 digits.
Operation of Keys to Be Key-Locked
Sets the operation of the keys to be key-locked. Select Lock or Free for each key
operation.
RCD:
key
Feed:
key
Menu:
key
Disp Menu:
1
key
Alarm ACK: Alarm ACK operation under the
key
Math: Computation start/stop/reset operation under the
key (/M1 option)
Print out: Printout start/stop/reset operation under the
key
Message: Message printout operation under the
key
Buffer clear: Clear operation of the printout buffer memory under the
key
Periodic: Clear operation of the report data of periodic printout under the
key
Pen exchange: Operation of moving the pen to an easily accessible position of
replacement under the
key (pen model)
R. exchange: Operation carried out when replacing the ribbon cassette with the power
turned ON under the
key (dot model)
Data save: Start/stop operation for saving data to the SD memory card under the
key (/EM1 option)
Data replay: Start/stop operation for replaying data from the SD memory card under
the
key (/EM1 option, dot model)
SD eject: Operation for ejecting the SD memory card under the
key (/EM1
option)
<Related Topics> Activating/Releasing the key lock: Section 3.13
7.10 Setting the Key Lock Function
To Next Page
Loading...
Need help?
General
