IM 04P01B01-01E
8-2
Data Display Setup Menu
This menu is used to assign display types to screen 01 to 15. The indicates a
display type. The items to set for each type are shown to the right of the display type.
Tag display type
Screen 01
1CH digital display
Display update rate
End
2CH digital display Display update rate End
Screen 15 4CH digital display Display update rate End
6CH digital display (dot model) Display update rate End
1CH digital + 1CH bargraph display
1CH digital + 4CH bargraph display (pen model)
2CH digital + 2CH bargraph display
Display update rate End
Display update rate End
Display update rate End
End
Flag display On/Off for each channel
End
Channel alarm status display End
Time/Chart speed display End
DI/DO display (when the /R1, or /A option is installed) End
(Display in which different screens can be
assigned to the top and bottom sections)
Channel number Display update rate
Top section
Channel number
Display update rate
End
Bottom section
Tag_1CH digital display
Tag_2CH digital display
Tag_1CH digital + 1CH bargraph display
Tag_1CH digital + 4CH bargraph display (pen model)
Status display End
System display End
Lights out End
Batch name display (when the /BT1 option is installed) End
Display update rate
End
End
Display update rate End
Display update rate End
Display update rate
Multiple display
4CH bargraph display (pen model), 6CH bargraph display (dot model)
SD memory card status display (when the /EM1 option is installed) End
The display update rate corresponds to “Interval” in the setup menu. It is the time interval at
which the displayed channel is switched.
8.1 Key Operations for Changing the Displayed Information