Zte ZXR10 ZSR V2 - Page 173

Chapter12MLDConguration
StepCommandFunction
1–65535,default:125,unit:
second.
ZXR10(config-mcast-ipv6-mld)#query-max-response-
time<seconds>
Conguresthemaximum
responsetimecarriedinthe
querymessagesentbythe
MLDprotocolininstance
mode.Range:1–25,default:
10,unit:second.
2
ZXR10(config-mcast-ipv6-mld-if-interface-
name)#query-max-response-time<seconds>
Conguresthemaximum
responsetimecarriedin
thequerymessagesent
bytheMLDprotocolin
interfacemode,whichtakes
precedence.Range:1–25,
default:10,unit:second.
ZXR10(config-mcast-ipv6-mld)#querier-timeout
<seconds>
Conguresthetime-out
durationoftheMLDquerier
ininstancemode.Range:
60–300,unit:second.
3
ZXR10(config-mcast-ipv6-mld-if-interface-
name)#querier-timeout<seconds>
Conguresthetime-out
durationoftheMLDquerierin
interfacemode,whichtakes
precedence.Range:60–300,
unit:second.
ZXR10(config-mcast-ipv6-mld)#last-member-query-in
terval<seconds>
Congurestheintervalofthe
MLDspecialgroupqueryin
instancemode.Range:1–25,
default:1,unit:second.
4
ZXR10(config-mcast-ipv6-mld-if-interface-
name)#last-member-query-interval<seconds>
Congurestheintervalofthe
MLDspecialgroupqueryin
interfacemode,whichtakes
precedence.Range:1–25,
default:1,unit:second.
8.Verifythecongurations.
CommandFunction
ZXR10#showipv6mldinterface[<interface-name>]DisplaysMLDcongurationonan
interface.
12-5
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential