Chapter 3 Web Configurator
ZyWALL USG 100/200 Series User’s Guide
48
2 Open your web browser, and go to http://192.168.1.1. By default, the ZyWALL
automatically routes this request to its HTTPS server, and it is recommended to
keep this setting. The Login screen appears.
Figure 11 Login Screen
3 Type the user name (default: “admin”) and password (default: “1234”).
If your account is configured to use an ASAS authentication server, use the OTP
(One-Time Password) token to generate a number. Enter it in the One-Time
Password field. The number is only good for one login. You must use the token to
generate a new number the next time you log in.
4 Click Login. If you logged in using the default user name and password, the
Update Admin Info screen (Figure 12 on page 48) appears. Otherwise, the
dashboard (Figure 13 on page 49) appears.
Figure 12 Update Admin Info Screen
To Next Page
Loading...
